 |
CC-105 Usage Status & User Evaluation (44KB) |
|
|
|
Heating/Concentration Mode: 400 W band heater warms samples during concentration.
Solid Rotor: Effect of heat conduction enables to shorten concentration times.
Air Mode: By combining air-flow-in operation, heating efficiency can be increased.
A memory function is available for repeated routine operation. This can store two frequently-used set values of operation as well as previous operating conditions.
A totally sealed magnetic drive pump and a Teflon coated chamber provide high corrosion resistance to acid and alkaline solvents.
The vacuum effect synchronized with rotation and slow start function eliminate bumping and foaming to guarantee safe operation.
| Model | CC-105 |
| Speed |
1,400rpm/1,700rpm(50/60Hz) |
| Heating Conditions |
OFF: No heating, LOW: Up to 40°C, HIGH: Up to 65°C |
| Vacuum Hose Diameter |
13.5mm(external diameter) |
| Heater |
400 W band heater |
| Driving Motor/System |
Induction motor/Magnetic drive system |
| Chamber Material |
Teflon-coated SUS304 |
| Dimensions |
315W x 335D x 350H mm(except protruding portion) |
| Net Weight |
21kg |
| Power Requirement | Single phase AC120V, 4.2A, 50/60Hz Single phase AC220/230/240V, 2.3A, 50/60Hz (External transformer used) |
| Model | TU-500 | TU-1000 |
| Lowest Attainable Temperature | -50°C | -100°C |
| Trap Capacity |
Approx. 1.4ℓ | Approx.1.4ℓ |
| Chamber Material |
SUS304 | SUS304 |
| Dimensions |
380W x 370D x 317Hmm | 420W x 510D x 475Hmm |
| Net Weight |
27kg | 56kg |
| Power Requirement | Single phase AC120V, 5.9A, 50/60Hz Single phase AC220/230/240V, 3.2A, 50/60Hz (External transformer used) |
Single phase AC120V, 10.9A, 50/60Hz Single phase AC220/230/240V, 6.0A, 50/60Hz (External transformer used) |
| Model |
| Chemical Filter Housing |
| Chemical Filter Cartridge 1 (for acid and aqueous solvents) |
| Chemical Filter Cartridge 5 (for alkaline, ammonia, pH solvents) |
| Oil Mist Trap OMT-050A (for GLD-051) |
| Oil Mist Separator OMC-050 (for GCD-051X) Attachment KF-25 (provided for OMC-050) |
| Vacuum Hose Adaptor for different diameter, apertures;φ13xφ10mm |
| Model | GLD-051 | GCD-051X(corrosion resistant) |
| Displacement |
50ℓ /min(50Hz), 60ℓ /min(60Hz) |
|
| Max. Vacuum Pressure |
6.7 x 10-2Pa (5 x 10-4Torr) | |
| Oil Capacity |
From 500mℓ to 800mℓ | |
| Specified Oil |
SMR-100 |
SO-M |
| Required Ambient Temp |
From 7°C to 40°C | From 7°C to 40°C |
| Dimensions |
166W x 399D x 223Hmm | 166W x 423D x 223Hmm |
| Net Weight | 14kg | 15kg |
| Power Requirement | Single phase AC220/230V, 2.5A, 50/60Hz | Single phase AC220/230V, 2.5A, 50/60Hz |
| Standard Accessory | Control box for CC-105 | |
| Model | DTU-20 (corrosion resistant diaphragm pump) |
| Displacement |
20L/min(50Hz)、23L/min(60Hz) |
| Max. Vacuum Pressure |
200Pa |
| Required Ambient Temp |
From 5°C to 40°C |
| Dimensions |
161W x 327D x 217Hmm |
| Net Weight | 7.5kg |
| Power Requirement | Single phase AC120V, 1.3A, 50/60Hz Single phase AC220/230/240V, 0.7A, 50/60Hz (External transformer used) |
| Model | Wagon 1000 |
| Dimensions | 757W x 604D x 697Hmm |
| Model | Max.RCF (xG) | Capacity | Type |
| TCA-6 |
225/330 | 60 x 1.5mℓ micro tube | S |
| TCA-7 |
230/340 | 36 x φ13x100mm |
S |
| TCA-8 |
230/335 | 24 x φ15x105mm |
S |
| TCA-72 |
225/330 | 72 x 1.5mℓ micro tube |
C |
| TCA-73 |
230/340 | 36 x φ13 x 100mm |
C |
| TCA-74 |
230/335 | 24 x φ15 x 105mm |
C |
| TCA-76 |
240/360 | 6 x 50mℓ +12 x 15mℓ |
C |
| TCP-11 | 210/310 | 2 x 96-well micro plate | C |
| AC120V 50/60Hz | AC220V 50/60Hz | AC230V 50/60Hz | AC240V 50/60Hz | |
| System1 |
- | 7.9A | 7.8A | - |
| System2 |
- | 7.9A | 7.8A | - |
| System3 |
- | 10.7A | 10.4A | - |
| System4 |
- | 10.7A | 10.4A | - |
| System5 |
11.4A | 6.2A | 6.0A | 5.8A |
| System6 |
16.4A | 9.0A | 8.6A | 8.3A |
* Specifications and design are subject to change for improvement without prior notice. Please ask for the latest specifications prior to your order and procurement.
The TOMY MV-100 MicroVac is a compact and complete vacuum centrifugal evaporator.
This tiny unit includes everything you need to dry alcohol or water based preciptates of DNA/RNA yet occupies only 8 x 10 inches of bench space. It features a built-in pump and a by-pass switch to allow the use of a stronger pump to shorten drying time.
The MV-100 also features a heating function to accelerate evaporation, acrylic lid and a stainless steel chamber.
| Model | MV-100 |
| Maximum Speed |
2,600rpm/2,800rpm (50/60Hz) |
| Maximum RCF |
400G/465G (50/60Hz) |
| Maximum Capacity |
12 x 1.5 mℓ |
| Rotor Driving System |
Magnetic drive |
| Vacuum Pump |
Compact oil-free pump |
| Vacuum Performance |
27hPa (20Torr) |
| Vacuum Gauge Scale |
0 - 0.1MPa (0 - 76cmHg) |
| Heater |
OFF: No Heat, ON: Heated at 55°C |
| Lid Material |
Clear acrylic |
| Chamber |
Stainless steel (SUS-304) |
| Filters |
Intake: 0.2μm filter (disposable) Exhaust: mist filter (disposable) |
| Vacuum Release |
Manual lever |
| Safety Devices |
Lid open/close interlock Safety type fuse (5A) |
| Net Weight |
Approximately 7.2 kg |
| Dimensions |
200W x 205D x 230Hmm |
| Power Requirement | AC110V/120V, 50/60Hz, 3A AC220V/230V/240V, 50/60Hz, 1.5A |
| Chemical | Resistance | Remark |
| 100% Ethanol |
Yes |
|
| 70% Ethanol |
Yes |
|
| Distilled Water |
Yes |
at 60°C or less |
| 0.1 mol/1 Hydrochloric Acid |
Yes |
at 55°C or less |
| Methanol |
Yes |
at 60°C or less |
| Ethyl Acetate |
No |
|
| Acetone |
No |
|
| Hexane |
No |
|
| Chloroform |
No |
|
| NitricAcid |
No |
|
| Sulfuric Acid |
No |
| Model |
Compact oil-free pump |
| Flow Rate |
4.2 L/min |
| Vacuum Degree |
5hPa (5mbar=3.75Torr) |
| Exhaust Pressure |
30kPa (0.3 kgf/cm2) |
* Specifications and design are subject to change for improvement without prior notice. Please ask for the latest specifications prior to your order and procurement.
|
* This document is created in the PDF file format. * To view PDF files, Adobe Reader or other software is needed. * If you don’t have Adobe Reader, click here to download its latest version. |
||||
 |
CC-105 (2.3MB) MV-100 (712KB) MV-100 (Chinese) (233KB) |
|||
