Low Speed Bench-top Centrifuge LCX-200 / 100

Low Speed Bench-top Centrifuge

LCX-200 / 100

TOP
Centrifuges
LCX-200 / 100

Wide Variety of Rotors

A wide variety of tubes and plates, such as 1.5 / 2.0 ml microtubes, 15 / 50ml conical tubes, blood collection tubes, micro / deep well plates, 250ml bottles, etc., and angled and swing out type rotors are available in three models to suit your application.

Swing Out Rotors

From micro tubes to 250ml bottles.
- TS-38C
  
  Bucket B438,
  Tube Rack 3850-04P
  Conical 50ml × 16
  
  Conical 50ml
- TS-7C
  
  Bucket 7115-08
  Conical 15ml × 32
- TS-33C
  
  Bucket B433
  250ml × 4
  Bucket Cap Kit B433
- TS-41C
  
  Deep-well
  plate × 4
Angle Rotors

Spinning maximum 10,000rpm (Angle rotors only).
- CA-16
  
  Conical 50ml × 8
  10,000 rpm
  11,740 G
- CA-5
  
  2ml × 24
  10,000 rpm
  9,390 G
- CA-14HS
  
  50ml / 14ml × 4
  10,000 rpm
  8,500 G (50ml)
  7,720 G (14ml)
- CA-15
  
  2ml × 18 or 0.5ml / 0.2ml × 12
  10,000 rpm
  8,500 G (2ml)
  6,600 G (0.5ml)
  5,810 G (0.2ml)

This bucket, which has been tested and certified by the Health Protection Agency (HPA, UK) to be compliant with the International Standard (Annex AA of the IEC 61010-2-020), meets requirements for biohazard safety.

It adopted a hermetically sealed structure equivalent to

bucket or rotor designed and tested in accordance with the International Standard (Annex AA of the IEC 61010-2-020) to offer excellent sealing performance.

Swing Out Rotors Compatibility

	CS-1	TS-4C	TS-7C	TS-33C	TS-38C	TS-41C
	Max. 10,000rpm	Max. 1,800rpm	Max. 5,000rpm	Max. 5,000rpm^*1	Max. 4,200rpm	Max. 4,500rpm
LCX-100	2 ml 10,000rpm	Microplates	Ο	Ο	–	–
LCX-200	2 ml 10,000rpm	Microplates	Ο	Ο	Ο	Deepwell Plates

^*

Fixed angle rotors are available for all models.
^*

The above specifications show the maximum value of sped (rpm). These values may change according to the combination of rotor, bucket, adapter and tubes.
^*1

LCX-100: Max.4,100rpm

Rotors & Accessories
Selection Guide

User Friendly and Safety Features

Mix Bucket & Mix Rack & Multi Rack

when 15ml tubes and 50ml tubes load to swing out rotor

Previous

1 set of 15ml tube bucket / rack and 1 set of 50ml tube bucket / rack were required.

Mix Bucket
&
Mix Rack

Mix bucket / Mix rack can be loaded 15ml tube and 50ml tube mixed together.
Bucket for TS-7C Swing Out Rotor

7M5015-1

(Mix Bucket)
(50ml × 1tube + 15ml × 4tubes) × 4

Mix bucket can be loaded 15ml tube and 50ml tube mixed together.

=50ml =15ml

Rack for TS-38C Swing Out Rotor

38M-TC0204P

(Mix Rack for Conical Tubes)
50ml × 2tubes × 4 or 15ml × 4tubes × 4

For example, Mix rack can be used(50ml × 1tube +15ml × 2tubes) × 4!

=50ml =15ml

3810M-14P

(Multi Rack for Blood Collection Tubes)
5～10ml × 14tubes × 4

Flex-Spin System for safer and more efficient operation

Innovative Flex-Spin System employed to maintain safe and efficient centrifugal operation allows a margin of error and eye-balancing of sample tubes.

^*

Some rotors are excepted.

LCX-200 / 100 are equipped with a function to automatically reduce the rotation speed and shut the system down if it is being run over the imbalance tolerance limit.

Flex-Spin Drive

The Flex-Spin Drive features a flexible motor shaft that equalizes minor imbalances without damaging the centrifuge or triggering the imbalance protection system. This allows excellent tolerance for minor differences in sample volumes.
One-push rotor locking knob
With a single knob push, the rotor can be quickly and securely fixed.
- ^*
  
  Some rotors are excepted.
- To mount the rotor
  
  Place the locking knob on the shaft and secure the rotor to the shaft by pressing the red snap on the locking knob down the shaft until it “clicks”.
- To dismount the rotor
  
  Pull the locking knob out from the shaft, while holding down the red snap on the top.

Intuitive Display and Control Panel

Easy-to-see LCD monitor display shows various information including remaining run time, error messages, rotor types in use and records of centrifugal operation.

^*

Indication displays on the control panel in the photo is different from displays of actual operation.

Dual color LED display allows the user to monitor the operation status just by looking the display; red indicates that the rotor is spinning while green indicates the rotor is stopped.

Three-step acceleration and three-step and natural deceleration

Initial values for acceleration and deceleration characteristics are set from 0 to 500rpm, however, they can be varied up to maximum speed in 100rpm increments by function settings.

Convenient Flashing Function

For quick spin-down.

Specifications

Model	LCX-200	LCX-100

Maximum Speed	10,000rpm
Maximum RCF	11,740G
Maximum Capacity	1,000ml (250ml × 4)
Speed Control System	Microprocessor feedback control
Drive Motor	Induction motor
Drive System	Flex-Spin drive system (Direct drive with an automatic alignment function)
Data Entry	Jog Dial equipped with an <ENTER> button
Speed Setting Range	100rpm to 10,000 rpm (100rpm increments)
RCF Setting Range	10 G to 11,740 G (Less than 300G : 10G increments, Over 300G : 100G increments）
Time Setting Range	From 10 sec to 50 sec, in 10 sec increments, from 1 min to 99 min, in 1 min increments or <F-> for free
Safety Devices	Imbalance detector, Lid interlock, Lid open / close detector, Abnormal speed detector, Over-current circuit breaker, Rotor identification system, Motor over-current detector.
Additional Functions	Three-step acceleration characteristics selection, Three-step deceleration characteristics selection, Three memory function, FLASH (momentary spin) function, BART Code selection, Memory function for last run parameters.
Rated Current	120V : 10A	－
	220-240V : 6A	220-240V : 4A
Power Requirements	1-Phase AC120V 60Hz 15A	－
	1-Phase AC220-240V 50 / 60Hz 8A	1-Phase AC220-240V 50 / 60Hz 8A
Power Consumption (Heat output)	660W (568kcal / h)	430W (370kcal / h)
Breaker	Rated breaking current 120V : 15A	－
	Rated breaking current 220-240V : 7.5A	Rated breaking current 220-240V : 7.5A
Protection Against Electric Shock	Class I
Dimensions (excluding hinge)	460W × 584D × 355H mm	430W × 554D × 355H mm
Net Weight	41kg	39kg
Environmental Requirements	Ambient temperature range：6 to 35℃, Relative humidity：not exceeding 75％RH, Altitude: up to 2000m, Intended exclusively for use indoors, overvoltage category：II, pollution degree：2, inclination：not exceeding 2 degrees
Accessories Included	Operator’s manual × 1copy, BART Code table × 1pc, Clear storage case for operator’s manual × 1pc, Rotor locking knob × 1pc, Power cord × 1pc, Digital Warranty Information × 1copy, Inspection sheet × 1copy.

^*

The above specifications show the maximum value of speed, RCF (G) and sample capacity. These values may change according to the combination of rotor, bucket, adaptor and tubes.

Download

LCX-200 / 100 Catalog