Full Lineup of the TOMY MX-Series Centrifuge that combines high performance for research applications and simplicity of use!
Flagship of the MX-Series, capable of accepting 50ml conical tubes
AR510-04
PCR96-02
From 2ml micro tubes to 30ml tubes, the MX-205 supports a wide range of applications.
AR050-12
5ml Conical tube
(Right; 1.5ml microtu)be
Advanced centrifuge model with simple operation designed to spin micro tubes
Sample animated images of the "3D High Speed Oscillating movement" can be viewed by pressing the "STOP" button/"STERT" button.
TOMY "Rack-in-Rotor "
-The Future of Centrifuge Rotor System
One of the most innovative features of the TOMY MX-Series High Speed Refrigerated Micro Centrifuge is its unique "Rack-in- Rotor" system using a combination of carbon fiber rotors and a variety of drop-in racks made of resin for greater convenience, higher performance and lower cost, including:
1. Stackable, drop-in/lift-out rotor racks for easy placement and removal
Lightweight resin racks have a drop-in/lift-out design which allows for easy placement and replacement of tubes. These rotor racks are available in a wide variety of types, and can be stacked in layers to suit your application.
2. Lightweight, yet stable rotation, and excellent acceleration/deceleration performance
Each rack has four slits so that the adhesion of the rack to the inner wall of the rotor is facilitated by centrifugal force, providing stable operation of the rotor. Lightweight rotors and racks can also increase acceleration and deceleration performance.
3. A wide variety of racks available at affordable prices
A large selection of resin racks is provided at affordable prices to accommodate tubes and plates of different volumes and numbers, which supports a diverse array of sample processing applications.
4. A portable rack for sample tubes
A resin rack can be used for a wide range of purposes, including storage and transportation. It can be used as a tube stand or carrier to hold or transport sample tubes.
HIGH SPEED REFRIGERATED MICRO CENTRIFUGE
TOMY "MX-Series "
-Toward High Performance and Simplicity!
The MX-Series is a high speed refrigerated micro centrifuge that is designed for high performance and simplicity of operation.
1. Faster acceleration and deceleration than its predecessor shortens run times.
2. All models are equipped with an imbalance detection system as a standard safety function.
3. User friendly, beautiful and functional design with human factors engineering in mind
4. Compact body design for easy installation and transportation
| Models | MX-305 | MX-205 | MX-105 | |
| Maximum Speed |
16,000rpm | 15,000rpm | ||
| Maximum RCF |
21,130G | 21,130G | 20,380G | |
| Maximum Capacity |
4 x 50ml | 6 x 30ml | 24 x 2ml | |
| Control System |
Microprocessor control (feedback system) | |||
| Drive Motor |
Induction motor | |||
| Drive System |
Direct drive with an automatic alignment function | |||
| Data Entry Device |
Jog Dial | |||
| Temperature Setting Range |
- 9 to 35°C (1°C increment) | |||
| Speed Setting Range |
300rpm to Maximum speed (100rpm increments) | |||
| RCF Setting Range |
100G to Maximum RCF (100G increments) | |||
| Time Setting Range |
0 to 99 minutes (1minute increment) or <F-> for free | |||
| Additional Functions |
• FLASH (momentary spin) function, • Memory function(three sets), • Previous setting memory, • Soft Brake function | |||
| Safety Devices |
• Lid interlock, • Lid open/close detector, • Over-speed detector, • Over-current circuit breaker, • Motor over-current detector, • Abnormally high or low chamber temperature detector, • Rotor identification system, • Imbalance detector | |||
| Refrigerant |
HFC134a(240g) | HFC134a(210g) | HFC134a(200g) | |
| Power Requirements |
Single phase AC110/120V 50/60Hz, 15A Single phase AC220/230/240V 50/60Hz, 8A |
|||
| Power Consumption (calorific value) |
860 Ｗ(740kcal/h) | 790 Ｗ(680kcal/h) | 650 Ｗ(560kcal/h) | |
| Dimensions (except protrusion) |
345W x 465D x 860H mm(table height:755Hmm, lid in open position:1125Hmm ) | |||
| Net Weight |
68kg(110/120V) 73kg(220/230/240V) |
67kg(110/120V) 72kg(220/230/240V) |
66kg(110/120V) 71kg(220/230/240V) |
|
| Cord Length |
3ｍ | |||
| Environmental Requirements |
Ambient temperature range:10 to 35°C, Relative humidity:30 to 85%, Atmospheric pressure:700 to 1060hPa |
|||
| Accessories Included | • Operator's manual 1, • Warranty card 1, • Customer card 1, • Inspection sheet 1, • Hexagon wrench 1, • Clear storage case 1, • Attaching screw 1, • Caster holder 2, • Drain plug 1 | |||
* Specifications and design are subject to change for improvement without prior notice. Please ask for the latest specifications prior to your order and procurement.
|
* This document is created in the PDF file format. * To view PDF files, Adobe Reader or other software is needed. * If you don’t have Adobe Reader, click here to download its latest version. |
||||
 |
MX-305 / 205 / 105 (1.1MB) MX-305 / 205 / 105 (Chinese)(1.1MB) |
|||
