Low Speed Refrigerated Centrifuge AX-521 / 511 / 501

Low Speed Refrigerated Centrifuge

AX-521 / 511 / 501

TOP
Centrifuges
AX-521 / 511 / 501

Wide Variety of Rotors

A wide variety of tubes and plates, such as 1.5 / 2.0 ml microtubes, 15 / 50ml conical tubes, blood collection tubes, micro / deep well plates, 250ml bottles, etc., and angled and swing out type rotors are available in three models to suit your application.

Swing Out Rotors

From micro tubes to 250ml bottles.
- TS-38C
  
  Bucket B438,
  Tube Rack 3850-04P
  Conical 50ml × 16
  
  Conical 50ml
- TS-7C
  
  Bucket
  7115-08
  Conical
  15ml × 32
- TS-33C
  
  Bucket B433
  250ml × 4
  Bucket Cap
  Kit B433
- TS-37C
  
  Bucket B437
  Tube Rack 3715-TC16P
  Conical
  15ml × 64
- TS-41C
  
  Deepwell
  plate × 4
Angle Rotors

Spinning maximum 10,000rpm (Angle rotors only).
- CA-16
  
  Conical 50ml × 8
  10,000 rpm
  11,740 G
- CA-5
  
  2ml × 24
  10,000 rpm
  9,390 G
- CA-14HS
  
  50ml / 14ml × 4
  10,000 rpm
  8,500 G (50ml)
  7,720 G (14ml)
- CA-15
  
  2ml × 18 or 0.5ml / 0.2ml × 12
  10,000 rpm
  8,500 G (2ml) / 6,600 G (0.5ml) /
  5,810 G (0.2ml)

This bucket, which has been tested and certified by the Health Protection Agency (HPA, UK) to be compliant with the International Standard (Annex AA of the IEC 61010-2-020), meets requirements for biohazard safety.

It adopted a hermetically sealed structure equivalent to

bucket or rotor designed and tested in accordance with the International Standard (Annex AA of the IEC 61010-2-020) to offer excellent sealing performance.

Swing Out Rotors Compatibility

	CS-1	TS-4C	TS-41C	TS-7C	TS-33C	TS-38C	TS-37C
	Max. 10,000rpm	Max. 1,800rpm	Max. 4,400rpm^*1	Max. 5,000rpm	Max. 4,800rpm^*2	Max. 4,200rpm	Max. 3,200rpm
AX-501	2 ml 10,000rpm	Microplates	Deepwell plates	Ο	Ο	–	–
AX-511				Ο	Ο	Ο	–
AX-521				Ο	Ο	Ο	Ο

^*

Fixed angle rotors are available for all models.
^*

The above specifications show the maximum value of sped (rpm). These values may change according to the combination of rotor, bucket, adapter and tubes.
^*1

AX-501: Max.3,600rpm
^*2

AX-501: Max.4,100rpm

Rotors & Accessories
Selection Guide

User Friendly and Safety Features

Mix Bucket & Mix Rack & Multi Rack

when 15ml tubes and 50ml tubes load to swing out rotor

Previous

1 set of 15ml tube bucket / rack and 1 set of 50ml tube bucket / rack were required.

Mix Bucket
&
Mix Rack

Mix bucket / Mix rack can be loaded 15ml tube and 50ml tube mixed together.
Bucket for TS-7C Swing Out Rotor

7M5015-1

(Mix Bucket)
(50ml × 1tube + 15ml × 4tubes) × 4

Mix bucket can be loaded 15ml tube and 50ml tube mixed together.

=50ml =15ml

Rack for TS-38C Swing Out Rotor

38M-TC0204P

(Mix Rack for Conical Tubes)
50ml × 2tubes × 4 or 15ml × 4tubes × 4

For example, Mix rack can be used(50ml × 1tube +15ml × 2tubes) × 4!

=50ml =15ml

3810M-14P

(Multi Rack for Blood Collection Tubes)
5 to 10ml × 14tubes × 4

Flex-Spin System for safer and more efficient operation

Innovative Flex-Spin System employed to maintain safe and efficient centrifugal operation allows a margin of error and eye-balancing of sample tubes.

^*

Some rotors are excepted.

Non-chlorine, ozone-friendly refrigeration medium which has zero ozone layer destruction coefficients is adopted.

Flex-Spin Drive

Flex-Spin Drive features a flexible motor shaft that equalizes minor imbalances without damaging the centrifuge or triggering the imbalance protection system. This allows excellent tolerance for minor differences in sample volumes.
One-push rotor locking knob
With a single knob push, the rotor can be quickly and securely fixed.
- ^*
  
  Some rotors are excepted.
- To mount the rotor
  
  Place the locking knob on the shaft and secure the rotor to the shaft by pressing the red snap on the locking knob down the shaft until it “clicks”.
- To dismount the rotor
  
  Pull the locking knob out from the shaft, while holding down the red snap on the top.

Intuitive Display and Control Panel

1Easy-to-see LCD monitor display shows various information including remaining run time, error messages, rotor types in use and records of centrifugal operation. The monitor can display in English or Japanese. (AX-521)

^*

Indication displays on the control panel in the photo is different from displays of actual operation.

2Dual color LED display allows the user to monitor the operation status just by looking the display; red indicates that the rotor is spinning while green indicates the rotor is stopped.

3Popular user-friendly Jog Dial equipped with an <ENTER> button on top enables setting to be changed quickly and more surely.

Compact Design

More compact in design, compared with existing high capacity refrigerated centrifuge, is one of the many advantages of the AX series.
AX Series are ideally suited for applications where space is limited.

Convenient Flashing Function

For quick spin-down.
Three-step acceleration and three-step and natural deceleration

Initial values for acceleration and deceleration characteristics are set from 0 to 500rpm, however, they can be varied up to maximum speed in 100rpm increments by function settings.

Environmentally Friendly

ECO mode

TOMY AX-Series new model is equipped with the power-saving [ECO] mode, reducing standby power consumption.

[ECO] mode
Electric power saving

Patented

Activating the power-saving [ECO] mode can also help reduce the power consumption during the waiting time (standby cooling) by allowing the temperature control bands to be changed.The chamber can cool down to the set temperature within approximately 3 minutes and a half * after release from ECO mode.
- ^*
  
  Under the conditions: set temperature of 4℃ at an ambient temperature of 25℃.
Power consumption at ECO mode

An overall increase in cooling efficiency allows for drastic reduction in energy usage during normal operation.
- ^*
  
  Measurement conditions: Set to 4℃ at an ambient temperature of 25℃ while centrifugation is stopped.
  (Rotors in use: AX-521 / AX-321: TS-37C+3750-TC06P)
- ^*
  
  The values shown above are average values obtained by measuring the units.

Specifications

Model	AX-521	AX-511	AX-501

Maximum Speed	10,000rpm
Maximum RCF	11,740G
Maximum Capacity	1,536ml (2ml × 96 Deepwell plate × 8)	1,000ml (250ml × 4)
Control System	Microprocessor control (feedback system)
Drive Motor	Induction motor
Drive System	Flex-Spin drive system (Direct drive with an automatic alignment function)
Data Entry	Jog Dial equipped with an <ENTER> button
Temperature Setting Range	From -9℃ to +35℃ (1℃ increment)
Speed Setting Range	100 to 10,000rpm (100rpm increments)
RCF Setting Range	10 to 11,740G (10G increments for the range less than 300G, 100G increments for the range over 300G)
Time Setting Range	From 10 sec to 50 sec, in 10 sec increments, from 1 min to 99 min, in 1 min increments or <F–> for free
Safety Devices	Imbalance detector, Lid interlock, Lid open / close detector, Abnormal speed detector, Over-current circuit breaker, Rotor identification system, Motor over-current detector, Abnormally high or low chamber temperature detector.
Additional Functions	Three-step acceleration characteristics selection, Three memory function, Three-step deceleration characteristics selection, FLASH (momentary spin) function, Memory function for last run parameters, BART Code selection, Power saving (ECO) mode
Refrigerant	HFC R404A (270g)	HFC R404A (260g)	HFC R404A (250g)
Rated Current	120V : 12A, 220 / 230 / 240V : 6A		120V : 10A, 220 / 230 / 240V : 5A
Power Requirements	1-Phase 50 / 60Hz AC120V 15A, 1-Phase 50 / 60Hz AC220 / 230 / 240V 8A
Power Consumption (Heat output)	970W (834kcal / h)	960W (826kcal / h)	760W (654kcal / h)
Breaker	Rated breaking current 120V : 15A, 220 / 230 / 240V : 7.5A
Protection Against Electric Shock	Class I
Dimensions (except protruding portion)	540W × 597D × 858H mm, (table height; 750H mm)	510W × 567D × 858H mm, (table height; 750H mm)	462W × 540D × 858H mm, (table height; 750H mm)
Net Weight	111kg (120V) 116kg (220 / 230 / 240V)	107kg (120V) 112kg (220 / 230 / 240V)	99kg (120V) 104kg (220 / 230 / 240V)
Environmental Requirements	Ambient temperature range:10 to 35℃, Relative humidity:30 to 85%, Atmospheric pressure:700 to 1,060hPa Intended exclusively for use indoors, Overvoltage category: II, Pollution degree: 2
Accessories Included	Operator’s manual × 1copy, BART Code table × 1pc, Clear storage case for operator’s manual × 1pc, Attaching screw for clear storage case × 1pc, Spanner × 1pc, Level gauge × 1pc, Rotor locking knob × 1pc, Drain plug × 1pc, Power cord × 1pc, Digital Warranty Information × 1copy.

^*

The above specifications show the maximum value of speed, RCF (G) and sample capacity. These values may change according to the combination of rotor, bucket, adaptor and tubes.

Download

AX-521 / 511 / 501 Catalog