Support
Disconnect the power supply by switching off the leakage breaker and power supply switch, and unpluging the power plug. Do this when the chamber temperature is sufficiently low.
<Drain water after use>
Drain both sterilized water in the chamber and water in the exhaust bottle / tank after use.
Clean the inside of chamber.
<Clean the inside of chamber>
Gently remove the bottom plate from inside the chamber. Remove contaminants and clean the sinside of chamber using a soft cloth moistened with mild detergent. Rinse detergent and contaminants thoroughly with water and drain water.
Be careful not to distort the sensors in the chamber during cleaning.
<Cleaning the main body>
Remove contaminants using a soft cloth moistened with mild detergent. Wipe off detergent using a tightly wrung-out damp cloth.
For details, please refer to the operation manual that came with each model you are using.